Rubber Band for Cartier Calibre Series

Description

Quick answer: This band for Cartier Calibre is an aftermarket rubber band for the Calibre de Cartier in 23mm or 24mm. It measures 125mm + 80mm, closes with a silver pin buckle and comes in black or blue.

Which watches does it fit?

It fits the Calibre de Cartier series; choose 23mm or 24mm to match the distance between your watch’s lugs.

Model / reference	Size
Calibre de Cartier	23mm or 24mm

Specifications

Type	Aftermarket rubber band
Material	Rubber
Lug width	23mm or 24mm
Length	125mm (long part) + 80mm (short part)
Buckle	Silver pin buckle
Colours	Black, Blue

Options

• Size: 23mm, 24mm
• Colour: Black, Blue

Why choose rubber for a Calibre

Rubber suits the Calibre better than leather for summer, travel and sport. It does not absorb sweat or water, so it stays fresh where a leather strap would darken and crack, and care is as simple as a rinse and wipe.

	Rubber	Leather
Look	Sporty, modern	Classic, dressy
Water and sweat	Does not absorb them	Avoid
Care	Rinse and wipe	Keep dry, condition occasionally

For a dressier Cartier, see the leather band for Cartier Santos 100.

How to fit it

1. Lay the watch face down on a soft cloth so the case and crystal are protected.
2. Use a spring bar tool to compress the spring bar at each lug and remove the current band.
3. Seat a spring bar in each end of the new band, place one tip in the lug hole, compress the other tip and let it click into place.
4. Pull gently on both sides to check it is locked in. Never open the case back: the band attaches only at the lugs.

Frequently asked questions

23mm or 24mm?

Measure the distance between the lugs of your Calibre in millimetres. If your current strap is marked on the underside, the width is usually printed there.

What buckle does it have?

A silver pin buckle.

Which colours are available?

Black and blue.

Read our watch band size guide, the guide to watch straps, or compare the Cartier Santos leather band.